[Tfug] Problem w/FreeBSD 6.1 disk detection

[Gordon Zaft]

 ARRGGH!  Help, I've fallen and I can't get up!

 I just updated my raid-5 server to FreeBSD 6.1, and
now it can't see the IDE hard disks that are on the
2nd and 3rd disk controllers.  The dmesg is below.  On
FreeBSD 4.11 these showed up fine as ad4, ad8 and
ad10.

 I can't see how this is a hardware issue since I
didn't open the box or anything, just updated and now
the disks are not seen.  The controllers ARE seen. 
I'm willing to RTFM but don't know which part of the M
to R.

 I tried running atacontrol info and it doesn't show
the disks attached at all :-(.  Note there's a
disturbing line "unknown: I/O range not supported"
toward the top of the dmesg.

 Any help will be appreciated!

dmesg:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
        The Regents of the University of California.
All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May  7 04:42:56 UTC 2006
    root at opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (898.26-MHz 686-class
CPU)
  Origin = "AuthenticAMD"  Id = 0x642  Stepping = 2
 
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
  AMD
Features=0xc0440800<SYSCALL,<b18>,MMX+,3DNow+,3DNow>
real memory  = 536805376 (511 MB)
avail memory = 515756032 (491 MB)
kbd1 at kbdmux0
acpi0: <AMIINT > on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
Timecounter "ACPI-safe" frequency 3579545 Hz quality
1000
acpi_timer0: <24-bit timer at 3.579545MHz> port
0x5008-0x500b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <AMD 751 host to AGP bridge> port 0x6400-0x6403
mem 0xe0000000-0xe7ffffff,
0xedbff000-0xedbfffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver
attached)
de0: <Digital 21140A Fast Ethernet> port 0x5c00-0x5c7f
mem 0xeff7ff80-0xeff7ffff
 irq 9 at device 3.0 on pci0
de0: 21140A [10-100Mb/s] pass 2.2
de0: Ethernet address: 00:c0:f0:30:84:08
atapci0: <CMD 649 UDMA100 controller> port
0x7800-0x7807,0x7400-0x7403,0x7000-0x
7007,0x6c00-0x6c03,0x6800-0x680f irq 10 at device 4.0
on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <SiI 0680 UDMA133 controller> port
0x5800-0x5807,0x5400-0x5403,0x4c00-0
x4c07,0x4800-0x4803,0x4400-0x440f mem
0xeff7fe00-0xeff7feff irq 5 at device 6.0
on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <VIA 82C686A UDMA66 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
6,0xffa0-0xffaf at device 7.1 on pci0
ata0: <ATA channel 0> on atapci2
ata1: <ATA channel 1> on atapci2
uhci0: <VIA 83C572 USB controller> port 0x4000-0x401f
irq 9 at device 7.2 on pci
0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 7.4 (no driver
attached)
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64
irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7
irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff
irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port
0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc9800-0xcffff,0xe8000-0xebfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 898261797 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 12416MB <WDC AC313000R 15.01J55> at ata0-master
UDMA33
acd0: CDRW <LG CD-RW CED-8080B/1.06> at ata1-master
PIO4
ast0: TAPE <Seagate STT20000A/8A51> at ata1-slave PIO4
Trying to mount root from ufs:/dev/ad0s1a


------
Gordon Zaft
zaft at zaft.org

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com